NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in this manual. • The reproduction, transfer or copy of all or any part of this document is not permitted without express written consent. REMARQUE • Les informations contenues dans ce manuel peuvent faire l'objet dechangements sans avertissement préalable. • Le fabricant ne prend aucune responsabilité pour les erreurs qui pourraient se trouver dans ce manuel. • La reproduction, la transmission ou l'utilisation de ce document ou de son contenu est interdite sauf autorisation spéciale écrite. HINWEIS • Die Informationen in diesem Handbuch können ohne vorherige Ankündigung geändert werden. • Der Hersteller übernimmt keine Verantwortung für etwaige in diesem Handbuch enthaltene Fehler. • Die Vervielfältigung, Übertragung oder Verwendung dieses Dokuments oder dessen Inhalts ist ohne ausdrückliche schriftliche Genehmigung nicht gestattet. NOTA • La información de este manual puede sufrir modificaciones sin previo aviso. • El fabricante no asume ninguna responsabilidad por los errores que puedan aparecer en este manual. • No está permitida la reproducción, transmisión o utilización de este documento ni de su contenido sin autorización expresa por escrito. NOTA • Le informazioni riportate in questo manuale sono soggette a modifica senza preavviso. • Il produttore declina qualsiasi responsabilità per eventuali errori che potrebbero comparire nel presente manuale. • E’ vietata la riproduzione, la trasmissione o l’utilizzo del presente documento o del suo contenuto senza espressa autorizzazione scritta. OPMERKING • De informatie in deze handleiding kan zonder voorafgaande kennisgeving veranderd worden. • De fabrikant neemt geen enkele verantwoordelijkheid voor de eventuele fouten in deze handleiding. • Reproductie, overdracht of het gebruik van dit document is niet toegestaan, zonder uitdrukkelijke toestemming van de betreffende partij. NOTA • As informações contidas neste manual estão sujeitas a alterações sem aviso prévio. • O fabricante não se responsabiliza por quaisquer erros que possam surgir neste manual. • A reprodução, transmissão ou utilização deste documento ou do seu conteúdo não é permitida sem autorização expressa por escrito. 通知事项 • 本书中刊载的内容有可能不经预告而发生变更。• 本产品的制造者对本书中的刊载错误不负 任何责任。• 未经允许请勿复制、转载和使用本书的部分或全部内容。 알림 • 본서에 기재되어 있는 내용은 예고 없이 변경하는 일이 있습니다 .• 본제품의 제조자는 , 본서 에 있어서의 기재 오류에 대해서 일절의 책임도 지지 않습니다 .• 본서 내용의 일부 혹은 전부를 무단 으로 복사하거나 전재하여 사용하는 것을 절대 금합니다 . NOTERA • Informationen i denna bruksanvisning kan komma att ändras utan förvarning. • Tillverkaren påtar sig inget ansvar för eventuella fel i denna bruksanvisning. • Återgivning, översändande eller användning av detta dokument eller dess innehåll är inte tillåten utan uttrycklig skriftligt medgivande. ПРИМЕЧАНИЕ. • Содержание данного руководства может изменяться без предварительного уведомления. • Производитель не несет ответственности за ошибки в данном руководстве. • Воспроизведение, передача и использование данного документа или его содержания запрещено без письменного разрешения. CATATAN • Informasi dalam manual ini dapat berubah tanpa pemberitahuan. • Pabrikan tidak bertanggung jawab terhadap segala kesalahan yang mungkin muncul dalam manual ini. • Penggandaan, transfer atau penyalinan semua atau sebagian dokumen ini tidak diizinkan tanpa persetujuan tertulis.
Proyektor
IN5122/IN5124 Panduan Ringkas
Terima kasih telah membeli proyektor ini. Bacalah manual ini dengan saksama sebelum menggunakan produk ini, agar dapat menggunakan produk dengan aman dan efektif. PERINGATAN ►Sebelum menggunakan produk ini, pastikan membaca semua manual produk. Setelah membacanya, simpan di tempat yang aman untuk referensi mendatang. ►Ikuti semua peringatan dan perhatian dalam manual dan pada produk. ►Ikuti semua petunjuk dalam manual dan pada produk.
Daftar Isi
Informasi Keselamatan........................ 2
Menghubungkan catu daya................. 8 Menghidupkan proyektor..................... 8 Menyesuaikan elevator proyektor....... 9 Menampilkan gambar........................ 10 Mematikan proyektor......................... 11 Mengganti lampu............................... 12 Membersihkan dan mengganti filter udara................................................. 14 Spesifikasi......................................... 16 Pemecahan Masalah - Garansi dan layanan purna jual.... 17 Perjanjian Lisensi Pengguna Akhir untuk Perangkat Lunak Proyektor......18
Penjelasan entri dan simbol grafis....................2 Petunjuk keselamatan penting..........................2
Pemberitahuan peraturan.................... 3 Tentang Interferensi Elektro-Magnet.................3 Tentang Limbah Peralatan Elektronik dan Listrik.....4
Isi kemasan......................................... 4 Persiapan............................................ 5 Memasukkan baterai ke dalam kontrol jarak-jauh...........................................................5
Susunan.............................................. 6 Menghubungkan dengan perangkat Anda.................................................... 7
1
BAHASA INDONESIA
CATATAN • Dalam manual ini, kecuali dinyatakan berbeda, “manual” merujuk pada semua dokumen yang disediakan untuk produk ini, dan “produk” merujuk pada proyektor ini dan semua aksesori yang menyertainya.
Informasi Keselamatan Penjelasan entri dan simbol grafis Entri dan simbol grafis berikut digunakan dalam manual ini untuk keperluan keselamatan. Biasakan diri Anda dengan berbagai item ini dan berikan perhatian khusus bila melihatnya. PERINGATAN
Entri ini memperingatkan risiko cedera diri yang serius atau bahkan kematian. PERHATIAN Entri ini memperingatkan risiko cedera diri kerusakan fisik. PEMBERITAHUAN Entri ini menunjukkan informasi penting agar proyektor Anda tetap berfungsi. Petunjuk keselamatan penting Berikut ini adalah petunjuk penting demi keselamatan menggunakan produk. Ikutilah selalu petunjuknya saat menangani produk. Pabrikan tidak bertanggung jawab atas kerusakan apa pun yang disebabkan oleh kesalahan penanganan di luar penggunaan biasa seperti yang ditentukan dalam manual proyektor ini. PERINGATAN ►Jangan menggunakan proyektor jika berfungsi tidak normal (misalnya mengeluarkan asap, mengeluarkan bau aneh, ada cairan atau benda asing di dalamnya, atau pecah, dsb.). Jika terjadi hal tersebut, segera cabut steker proyektor. ►Jauhkan proyektor dari anak-anak dan hewan peliharaan. ►Jangan gunakan proyektor di saat badai petir. ►Cabut steker proyektor dari stopkontak bila proyektor tidak sedang digunakan. ►Jangan membuka atau melepas bagian apa pun pada proyektor, kecuali manual menyebutkan demikian. Pemeliharaan internal harus diserahkan pada dealer Anda dan petugas servis. ►Hanya gunakan aksesori yang ditetapkan atau disarankan oleh pabrikan. ►Jangan memodifikasi proyektor atau aksesori. ►Jangan biarkan cairan atau bahan lainnya masuk ke proyektor. ►Jangan sampai proyektor basah. ►Jangan meletakkan proyektor di tempat yang berminyak, seperti minyak goreng atau oli mesin. Minyak dapat merusak proyektor, menyebabkan proyektor gagal berfungsi atau menyebabkan proyektor jatuh dari tempat pemasangannya. ►Jangan menggoncang atau menekan proyektor ini. ►Jangan meletakkan proyektor pada permukaan yang tidak stabil seperti permukaan yang tidak rata atau meja yang miring. ►Jangan meletakkan proyektor secara goyah. Letakkan proyektor agar tidak menonjol dari permukaan tempat memasangnya. ►Lepaskan semua sambungan dari proyektor, termasuk kabel daya dan kabel lainnya, sebelum membawa proyektor. ►Jangan menatap lensa atau lubang apa pun pada proyektor, selagi lampunya menyala. ►Jangan dekat-dekat dengan pintu lampu atau ventilasi keluaran, selagi lampu proyektor menyala. Selain itu, jika lampunya padam, jangan menyentuh lampu kecuali sudah dingin. 2
Pemberitahuan peraturan Peringatan FCC Peralatan ini telah diuji dan terbukti mematuhi batas-batas untuk perangkat digital Kelas A, sesuai dengan bagian 15 pada Peraturan FCC. Batas-batas ini dirancang untuk memberikan perlindungan yang sewajarnya terhadap interferensi merusak bila peralatan dioperasikan di lingkungan komersial. Peralatan ini menghasilkan, menggunakan dan dapat memancarkan energi frekuensi radio dan, jika tidak dipasang dan digunakan sesuai dengan petunjuk, dapat menyebabkan interferensi yang mengganggu komunikasi radio. Pengoperasian peralatan ini di area tempat tinggal mungkin menyebabkan interferensi merusak yang mengharuskan pengguna mengatasi sendiri interferensi tersebut. Perangkat ini telah sesuai dengan bagian 15 pada Peraturan FCC. Pengoperasian tunduk pada dua persyaratan berikut: (1) Perangkat ini tidak dapat menyebabkan interferensi yang berbahaya dan (2) Perangkat ini harus menerima segala interferensi yang masuk, termasuk interferensi yang mungkin menyebabkan pengoperasian yang tidak diinginkan. Perubahan atau modifikasi yang tidak disetujui secara resmi oleh InFocus Corporation dapat membatalkan kewenangan mengoperasikan peralatan.
ID Arahan EMC Produk ini dapat menyebabkan interferensi jika digunakan di area tempat tinggal. Penggunaan demikian harus dihindari kecuali jika pengguna melakukan tindakan pencegahan khusus untuk mengurangi emisi elektromagnet untuk mencegah interferensi terhadap penerimaan siaran radio dan televisi. Kanada Ini adalah alat digital Kelas A yang telah sesuai dengan Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. PERHATIAN: Perubahan atau modifikasi yang tidak disetujui secara resmi oleh pihak penanggung jawab kepatuhan dapat membatalkan kewenangan pengguna untuk mengoperasikan peralatan ini.
3
BAHASA INDONESIA
ID 55022 Peringatan Ini adalah produk Kelas A. Di lingkungan rumah tangga, peralatan ini dapat menyebabkan interferensi radio sehingga dalam hal ini pengguna perlu mengambil tindakan yang semestinya. Biasanya digunakan di ruangan konferensi, ruangan pertemuan atau auditorium.
Pemberitahuan peraturan (sambungan) Tentang Limbah Peralatan Elektronik dan Listrik Ini menandakan kepatuhan pada Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). Tanda ini menunjukkan ketentuan untuk TIDAK membuang peralatan termasuk baterai atau aki yang sudah lemah atau habis sebagai limbah rumah tangga yang tidak disortir, melainkan menggunakan sistem pengembalian dan pengumpulan yang tersedia. Jika baterai atau aki yang disertakan bersama peralatan ini, menampilkan simbol bahan kimia Hg, Cd, atau Pb, berarti baterai mengandung logam berat lebih dari 0,0005% Merkuri atau lebih dari 0,002% Kadmium, atau lebih dari 0,004% Timbal.
Isi kemasan Proyektor Anda seharusnya disertai dengan item-item yang ditampilkan di bawah ini. Periksa apakah semua item telah disertakan. Segera beri tahu dealer jika ada item yang hilang. (1) Kontrol jarak-jauh (2) Kabel daya (3) Kabel komputer (4) Penutup lensa (5) Dokumentasi (6) Label keamanan (7) Kabel A/V
(1)
(4)
(5) (2) (6) (3) (7)
CATATAN • Simpan bahan kemasan aslinya untuk pengiriman yang akan datang. Pastikan menggunakan bahan kemasan aslinya saat memindah proyektor. Gunakan pemberitahuan untuk lensa. • Proyektor mungkin mengeluarkan bunyi berderik saat dimiringkan, dipindah atau digoncang, karena flap untuk mengontrol aliran udara masuk pada proyektor akan bergerak. Waspadailah bahwa ini bukan kerusakan atau kegagalan fungsi.
4
Persiapan
Memasukkan baterai ke dalam kontrol jarak-jauh Masukkan baterai ke dalam kontrol jarak-jauh sebelum menggunakannya. Jika kontrol jarak-jauh mulai gagal berfungsi, cobalah mengganti baterainya. Jika Anda tidak akan menggunakan kontrol jarak-jauh dalam waktu lama, keluarkan baterainya dan simpan di tempat yang aman. penutup baterai untuk 1. Geserlah mengeluarkannya. dan masukkan dua baterai 2. Sejajarkan AA sesuai dengan kutub positif dan
3.
1
2
3
negatif yang ditunjukkan di kontrol jarak-jauh. Pasang kembali penutup baterai searah panah dan masukkan kembali pada tempatnya.
• Saat mengganti baterai, gantilah kedua baterai dengan baterai baru yang sama jenisnya. Jangan gunakan baterai baru bersama baterai bekas. • Pastikan hanya menggunakan baterai yang ditetapkan. Jangan gunakan baterai bersama jenis yang berbeda. Jangan mencampur baterai baru dengan yang bekas. • Pastikan terminal positif dan negatif telah disejajarkan dengan benar saat memuat baterai. • Jauhkan baterai dari anak-anak dan hewan peliharaan. • Jangan mengisi ulang, membuat hubungan singkat, menyolder atau membongkar baterai. • Jangan masukkan baterai ke api atau air. Simpan baterai di tempat gelap, dingin dan kering. • Jika Anda melihat kebocoran baterai, seka bocoran tersebut kemudian ganti baterainya. Jika bocorannnya mengenai badan atau pakaian Anda, segera bilas dengan air. • Patuhi hukum setempat bila membuang baterai.
5
BAHASA INDONESIA
PERINGATAN ►Peganglah selalu baterai dengan hati-hati dan gunakan sebagaimana pengarahan saja. Penggunaan tidak benar dapat menyebabkan baterai meledak, retak atau bocor, yang dapat menyebabkan kebakaran, cedera dan/atau polusi terhadap lingkungan sekitar.
Susunan Lihat tabel T-1 dan T-2 di bagian belakang manual serta yang berikut ini untuk menentukan ukuran layar dan jarak proyeksi. Bagian atas proyektor
Bagian bawah proyektor Ⓗ× Ⓥ: Ukuran layar ⓐ: Jarak proyeksi (dari ujung proyektor) ⓑ, ⓒ Tinggi layar
PERINGATAN ►Pasang proyektor di mana Anda dapat mengakses stopkontak dengan mudah. ►Jangan memasang proyektor di tempat yang tidak stabil. Pasang proyektor di posisi horizontal yang stabil. ►Jangan gunakan aksesori pemasangan selain yang ditetapkan oleh pabrikan. Baca dan simpan manual aksesori yang telah digunakan. ►Untuk pemasangan khusus, seperti pemasangan di langit-langit, pastikan berkonsultasi dengan dealer Anda terlebih dahulu. Aksesori pemasangan dan layanan tertentu mungkin diperlukan. ►Jangan memasang proyektor dekat barang yang menghantar panas atau mudah terbakar. ►Jangan meletakkan proyektor di tempat yang berminyak, seperti minyak goreng atau oli mesin. ►Jangan sampai proyektor basah. PERHATIAN ►Pasang proyektor di tempat yang dingin dengan ventilasi memadai. ►Jaga jarak 1’ (30 cm) atau lebih antara sisi-sisi proyektor dan benda lain seperti tembok. ►Jangan menyumbat, menghalangi atau menutupi ventilasi proyektor. ►Jangan memasang proyektor di tempat yang mengandung medan magnet; karena dapat menyebabkan kipas pendingin di dalam proyektor gagal berfungsi. ►Hindari memasang proyektor di tempat yang berasap, lembap atau berdebu. ►Jangan meletakkan proyektor dekat alat pelembap udara. Khususnya dengan alat pelembap ultrasonik, khlor dan mineral yang terkandung dalam air keran akan terurai dan dapat terkumpul di proyektor yang akhirnya menyebabkan degradasi citra atau masalah lainnya. PEMBERITAHUAN • Posisikan proyektor agar sinar tidak langsung mengenai sensor jarak-jauh proyektor. • Jangan memasang produk di tempat yang dapat terjadi interferensi radio. 6
Menghubungkan dengan perangkat Anda
Sebelum menghubungkan proyektor ke perangkat, bacalah manual perangkat untuk mengkonfirmasi bahwa perangkat cocok untuk dihubungkan dengan proyektor ini dan siapkan aksesori yang diperlukan, seperti kabel yang kompatibel dengan sinyal perangkat. Tanyakan pada dealer Anda bila aksesori yang diperlukan tidak disertakan bersama produk atau aksesori tersebut rusak. Setelah memastikan proyektor dan perangkat telah dimatikan, lakukan penyambungan, sesuai dengan petunjuk berikut. Lihat gambar F-1 sampai F-4 di belakang manual ini. Untuk perinciannya, lihat Manual Pengguna. Sebelum menghubungkan proyektor ke sistem jaringan, pastikan juga membaca Panduan Jaringan.
CATATAN • Jangan menghidupkan atau mematikan proyektor selagi terhubung ke perangkat yang mengoperasikannya, kecuali jika diperintahkan demikian dalam manual perangkat. • Beberapa port masukan dapat dipilih. Untuk perinciannya, lihat Manual Pengguna. • Berhati-hatilah agar tidak salah menghubungkan konektor ke port yang salah. • Jika perangkat penyimpanan USB yang terlalu besar ukurannya menghalangi port LAN, gunakan kabel sambungan USB untuk menghubungkan ke perangkat penyimpanan USB. • Jika terdengar berisik keras dari speaker, pindahkan mikrofon dari speaker. • Proyektor ini tidak memasok daya ke mikrofon.
7
BAHASA INDONESIA
PERINGATAN ►Gunakan hanya aksesori yang sesuai. Jika tidak, dapat terjadi kebakaran atau kerusakan pada proyektor atau perangkat. ►Hanya gunakan aksesori yang ditetapkan atau disarankan oleh pabrikan proyektor. Pabrikan mungkin mengikuti standar peraturan. ►Jangan membongkar atau memodifikasi proyektor atau aksesorinya. ►Jangan gunakan aksesori yang rusak. Hindari kerusakan aksesori. Atur kabel agar tidak terinjak atau tergencet. PERHATIAN ►Untuk kabel dengan inti di satu ujung, hubungkan ujung yang mempunyai inti ke proyektor. Ini mungkin diharuskan oleh peraturan EMI. ►Sebelum menghubungkan proyektor ke sistem jaringan, pastikan memperoleh izin administrator jaringan. ►Jangan hubungkan port LAN ke jaringan yang mungkin berlebihan voltasenya. ►Sebelum melepas perangkat penyimpanan USB dari port proyektor, pastikan menggunakan fungsi REMOVE USB pada layar miniatur untuk melindungi data Anda.
Menghubungkan catu daya konektor kabel daya ke AC IN (AC 1. Masukkan inlet) pada proyektor. dengan erat steker kabel daya 2. Tancapkan ke stopkontak listrik. Beberapa detik setelah
listrik terhubung, indikator POWER akan terus menyala jingga. Ingatlah bahwa bila fungsi AC POWER ON diaktifkan, menghubungkan listrik akan menyebabkan proyektor dihidupkan.
AC IN Kabel daya
PERINGATAN ►Lebih berhati-hatilah saat menghubungkan kabel daya, karena penyambungan yang tidak benar atau salah dapat menyebabkan kebakaran dan/atau sengatan listrik. • Hanya gunakan kabel daya yang disertakan bersama proyektor. Jika sudah rusak, konsultasikan dengan dealer untuk mendapatkan yang baru. • Hanya tancapkan kabel daya ke stopkontak dengan voltase yang sama. Stopkontak listrik harus dekat dengan proyektor dan mudah diakses. Lepaskan kabel daya untuk memutus sama sekali aliran listrik. • Jangan sekali-kali memodifikasi kabel data.
Menghidupkan proyektor
kabel daya telah terhubung dengan 1. Pastikan erat dan benar ke proyektor dan stopkontak. bahwa indikator POWER tetap 2. Pastikan menyala jingga. Kemudian lepaskan
penutup lensa. Tekan tombol STANDBY/ON pada proyektor atau kontrol jarak-jauh. Lampu proyeksi akan menyala dan indikator POWER akan mulai berkedip hijau. Bila sudah benar-benar hidup, indikator akan berhenti berkedip dan menjadi hijau terus.
3.
Tombol STANDBY/ON Indikator POWER STANDBY/ON
SOURCE
MENU
SECURITY LAMP TEMP POWER
PERINGATAN ►Cahaya kuat terpancar saat proyektor dihidupkan. Jangan menatap lensa proyektor atau melihat bagian dalam proyektor melalui lubang apa pun pada proyektor. CATATAN • Hidupkan proyektor sebelum menghidupkan perangkat yang terhubung. • Proyektor mempunyai fungsi AC POWER ON, yang dapat membuat proyektor dihidupkan secara otomatis. Untuk informasi lebih lanjut, lihat Manual Pengguna. 8
Menyesuaikan elevator proyektor
1. 2. 3. 4. 5.
Untuk melonggarkan kaki elevator, tekan tombol elevator pada sisi yang sama.
Untuk menyesuaikan lebih akurat, putar kakinya.
PERHATIAN ►Jangan memegang tombol elevator tanpa menahan proyektor, karena proyektor bisa jatuh. ►Jangan memiringkan proyektor kecuali dengan menaikkan bagian depannya tidak lebih dari 12 derajat dengan kaki pengaturnya. Proyektor yang dimiringkan lebih dari ukuran tersebut dapat gagal berfungsi, atau memperpendek usia bahan pakainya atau masa pakai proyektornya sendiri.
9
BAHASA INDONESIA
Bila permukaan proyeksi sedikit tidak rata di kiri atau kanan, gunakan kaki elevator untuk memperbaiki penempatan proyektor. Kaki tersebut juga dapat digunakan untuk memiringkan proyektor dan dapat menaikkan sisi depan proyektor hingga 12 derajat. Proyektor ini mempunyai 2 kaki elevator dan 2 tombol elevator. Kaki elevator dapat disesuaikan bila Anda menekan tombol elevator pada sisi yang sama secara bersamaan. Sambil menahan proyektor, tekan tombol elevator untuk melonggarkan kaki elevator. Posisikan bagian depan proyektor hingga ketinggian yang diinginkan. Lepaskan tombol elevator agar dapat mengunci kaki elevator. Setelah memastikan kaki elevator terkunci, pelanpelan turunkan proyektor. Jika perlu, kaki elevator dapat diputar secara manual untuk penyesuaian yang lebih akurat. Tahan proyektor saat memutar kakinya.
Menampilkan gambar
1. 2. 3.
4. 5. 6. 7. 8. 9.
Aktifkan sumber sinyal Anda. Hidupkan sumber sinyal dan buat agar ia mengirim sinyal ke proyektor. Gunakan tombol VOLUME + / VOLUME untuk menyesuaikan volume. Untuk mematikan suara proyektor, tekan tombol MUTE pada kontrol jarak-jauh. Tekan tombol SOURCE pada proyektor. Setiap kali Anda menekan tombol, proyektor akan berputar ke setiap port masukan. Anda juga dapat menggunakan kontrol jarak jauh untuk memilih sinyal masukan. Tekan tombol RESIZE pada kontrol jarak jauh. Setiap kali Anda menekan tombol, proyektor akan berputar ke setiap mode rasio aspek. Gunakan cincin ZOOM untuk menyesuaikan ukuran layar. Gunakan cincin FOCUS untuk memfokuskan gambar. Putar pengatur VERTICAL untuk memutar berlawanan arah jarum jam. Kemudian putar searah jarum jam dan sesuaikan posisi lensa vertikal ke atas. Putar LOCK berlawanan arah jarum jam untuk melonggarkan kunci pengatur HORIZONTAL. Putar pengatur HORIZONTAL searah jarum jam atau berlawanan arah jarum jam untuk menyesuaikan posisi lensa horizontal. Putar LOCK searah jarum jam untuk mengencangkannya dan mengunci posisi lensa horizontal.
10.
(bersambung ke halaman berikutnya)
10
Tombol VOLUME+ Tombol VOLUMETombol MUTE
Tombol SOURCE STANDBY/ON
SOURCE
MENU
Tombol SOURCE Tombol RESIZE
LOCK
Cincin FOCUS Cincin ZOOM LOCK (kunci posisi lensa horizontal) Pengatur HORIZONTAL Pengatur VERTICAL
Menampilkan gambar (sambungan) PERHATIAN ►Jika Anda ingin menampilkan layar kosong saat lampu proyektor menyala: - Gunakan fungsi BLANK (lihat Manual Pengguna). Melakukan tindakan lain dapat menyebabkan kerusakan pada proyektor. CATATAN • Tombol RESIZE tidak berfungsi bila masukan sinyalnya tidak benar. • Untuk perincian mengenai cara menyesuaikan gambar, lihatlah Manual Pengguna.
Mematikan proyektor
tombol STANDBY/ON pada 1. Tekan proyektor atau kontrol jarak-jauh.
Pesan “Power off?” akan muncul pada Tombol STANDBY/ON layar sekitar 5 detik. Indikator POWER Tekan lagi tombol STANDBY/ON saat pesan muncul. Lampu proyektor akan padam, dan indikator POWER akan mulai berkedip jingga. Kemudian indikator POWER akan berhenti berkedip dan menjadi tetap jingga setelah lampu menjadi dingin. Pasang penutup lensa, hanya setelah indikator POWER terus menyala jingga. Jangan hidupkan proyektor selama 10 menit atau lebih setelah mematikannya. Juga, jangan matikan proyektor setelah sebentar menghidupkannya. Pengoperasian demikian dapat menyebabkan kegagalan fungsi atau memperpendek masa pakai beberapa komponen, termasuk lampu.
2.
STANDBY/ON
SOURCE
MENU
SECURITY LAMP TEMP
POWER
PERINGATAN ►Jangan menyentuh area apa pun sekitar pintu lampu atau ventilasi keluaran selama penggunaan atau setelah penggunaan, karena terlalu panas. ►Lepaskan kabel daya untuk memutus sama-sekali listriknya. Stopkontak listrik harus dekat dengan proyektor dan mudah diakses. CATATAN • Matikan proyektor setelah semua perangkat yang terhubung dimatikan. • Proyektor ini mempunyai fungsi AUTO POWER yang dapat membuat proyektor dimatikan secara otomatis. Untuk informasi lebih lanjut, lihat Manual Pengguna. 11
BAHASA INDONESIA
3.
Mengganti lampu Lampu mempunyai masa pakai yang terbatas. Menggunakan lampu dalam waktu lama dapat menyebabkan gambar menjadi redup dan nuansa warna menjadi buruk. Setiap lampu mempunyai masa pakai berbeda, dan sebagian mungkin meletup atau hangus tidak lama setelah Anda mulai menggunakannya. Disarankan membeli lampu pengganti lebih dahulu. Untuk membeli lampu baru, hubungi dealer Anda dan beri tahu nomor komponen lampu tersebut. Nomor komponen: SP-LAMP-064 3 Pintu lampu Matikan proyektor dan cabut steker kabel daya. Biarkan proyektor dingin paling tidak selama 45 menit. Beli lampu baru. Jika proyektor dipasang di langitlangit, atau jika lampu pecah, Anda dapat meminta dealer memasangkan lampu tersebut. Jika Anda memasang sendiri lampu tersebut, ikuti prosedur ini: Longgarkan sekrupnya (bertanda panah) pada pintu lampu kemudian geser dan angkat pintu lampu ke samping untuk melepasnya. Longgarkan 3 sekrupnya (bertanda panah) pada lampu, dan pelan-pelan lepaskan lampu menggunakan pegangannya. Jangan 4 Pegangan melonggarkan sekrup lainnya. Masukkan lampu baru, dan kencangkan lagi 3 sekrup pada lampu dengan erat (yang tadi dilonggarkan) untuk mengunci pada tempatnya.
1. 2. 3. 4.
5.
kembali pintu lampu pada tempatnya. 6. Masukkan Kemudian kencangkan dengan erat sekrup pada
pintu lampu. Hidupkan proyektor dan reset waktu lampu 6 menggunakan item RESET LAMP HOURS dalam menu SERVICE. (1) Tekan tombol MENU untuk menampilkan menu. (2) Pilih ADVANCED MENU dalam menu menggunakan tombol V / Λ, kemudian tekan tombol >. (3) Pilih OPTION di kolom kiri pada menu menggunakan tombol V / Λ, kemudian tekan tombol >. (4) Pilih SERVICE dalam menu menggunakan tombol V / Λ, kemudian tekan tombol >. (5) Pilih RESET LAMP HOURS menggunakan tombol V / Λ, kemudian tekan tombol >. Sebuah dialog akan muncul. (6) Tekan tombol > untuk memilih “YES” pada dialog. Ini akan mereset waktu lampu.
7.
PERHATIAN ►Jangan menyentuh area bagian dalam tempat lampu dilepas dari proyektor. 12
Mengganti lampu (sambungan)
VOLTASE TINGGI
SUHU TINGGI
TEKANAN TINGGI
PERINGATAN ►Proyektor menggunakan lampu kaca merkuri bertekanan tinggi. Lampu bisa pecah dengan bunyi yang keras, atau terbakar, jika diguncang atau digaruk, dipegang selagi panas, atau aus dengan sendirinya. Perhatikan, setiap lampu mempunyai masa pakai berbeda, dan sebagian mungkin meletup atau hangus tidak lama setelah Anda mulai menggunakannya. Selain itu, jika bola lampu meletup, kemungkinan serpihan kacanya terserak di dalam rumah lampu, dan gas berisi merkuri serta debu berisi partikel kaca yang halus keluar dari ventilasi proyektor. ►Tentang membuang lampu: Produk ini berisi lampu merkuri; jangan membuangnya di tempat sampah. Buanglah sesuai undang-undang lingkungan. • Untuk mendaur ulang lampu, kunjungi www.lamprecycle.org (di AS). • Untuk membuang produk, tanyakan pada dinas pemerintah daerah Anda atau www.eiae.org (di AS) atau www.epsc.ca (di Kanada). Untuk informasi lebih lanjut, tanyakan pada dealer Anda.
• Jangan membuka sekrup selain yang bertanda panah. • Jangan membuka pintu lampu selagi proyektor menggantung dari langitlangit. Ini berbahaya, karena jika bola lampu pecah, serpihannya akan jatuh bila penutupnya dibuka. Selain itu, bekerja di tempat yang tinggi berbahaya, jadi mintalah dealer di tempat Anda untuk memasangkan lampunya jika bola lampu pecah. • Jangan gunakan proyektor dengan pintu lampu dilepas. Saat mengganti lampu, pastikan sekrupnya telah dikencangkan dengan erat. Sekrup yang longgar dapat menyebabkan bahaya atau luka.
• Hanya gunakan jenis lampu yang ditetapkan. Menggunakan lampu yang tidak memenuhi spesifikasi lampu untuk model ini dapat menyebabkan kebakaran, kerusakan proyektor atau memperpendek masa pakai produk ini. • Jika lampunya pecah tidak lama setelah digunakan pertama kali, kemungkinan ada masalah kelistrikan di bagian lain di samping lampu. Jika hal ini terjadi, tanyakan pada dealer di tempat Anda atau perwakilan layanan. • Pegang dengan hati-hati: mengguncang atau menggaruk dapat menyebabkan bola lampu meletup saat digunakan. • Menggunakan lampu dalam waktu lama dapat menyebabkan lampu menjadi redup, tidak menyala atau meletup. Bila gambarnya tampak redup, atau bila nuansa warnanya buruk, gantilah lampu secepatnya. Jangan gunakan lampu lama (bekas); ini bisa pecah. 13
BAHASA INDONESIA
• Seandainya lampu pecah, cabut steker kabel daya dari stopkontak, dan pastikan meminta lampu pengganti dari dealer di tempat Anda. Perhatikan, serpihan kaca dapat merusak komponen proyektor, dan menyebabkan luka saat memegang, jadi jangan coba-coba membersihkan proyektor atau mengganti lampu sendiri. • Jika lampu pecah, biarkan udara mengaliri ruangan dengan baik, dan Lepaskan pastikan tidak menghirup gas atau partikel halus yang berasal dari ventilasi steker dari proyektor, dan masuk ke mata atau mulut Anda. stopkontak • Sebelum mengganti lampu, matikan proyektor dan cabut steker kabel daya, listrik kemudian tunggu setidaknya 45 menit hingga lampu cukup dingin. Memegang lampu selagi panas bisa menyebabkan melepuh, serta merusak lampu.
Membersihkan dan mengganti filter udara
Periksa dan bersihkan filter udara secara rutin. Bila indikator atau pesan meminta Anda membersihkan filter udara, lakukan sesegera mungkin. Filter udara pada proyektor terdiri dari penutup filter dan unit filter dengan dua jenis bahan filter. Jika salah satu atau kedua filter rusak atau kotor sekali, gantilah unit filter dengan yang baru. Mintalah perangkat saringan dengan nomor komponen berikut ini dari agen Anda saat membeli baru Nomor komponen: SP-FILTER-04
Catatan: Unit filter juga dipasarkan bersama lampu pengganti. Gantilah unit filter saat Anda mengganti lampunya.
1. 2. 3. 4. 5.
6. 7. 8. 9.
Matikan proyektor dan cabut steker kabel daya. Biarkan proyektor cukup dingin. Gunakan penyedot debu pada dan sekeliling penutup filter. Pegang dan tarik kenop penutup filter untuk melonggarkan filternya. Tekan sedikit kenop sisi bawah untuk membuka kunci sisi bawah unit filter. Tarik kenop tengah untuk melepas unit filter. Gunakan penyedot debu untuk membersihkan ventilasi filter proyektor dan sisi luar unit filter. Unit filter terdiri dari dua komponen. Tekan ke bawah sekeliling komponen penghubung untuk membuka kuncinya, dan pisahkan kedua komponen. Gunakan penyedot debu untuk membersihkan sisi dalam setiap komponen unit filter. Jika filternya rusak atau kotor sekali, gantilah dengan yang baru. Satukan kedua komponen untuk memasang kembali unit filter. Masukkan kembali unit filter ke proyektor.
(bersambung ke halaman berikutnya)
14
Penutup filter Kenop penutup filter Unit filter
Kenop unit filter Komponen penghubung
Membersihkan dan mengganti filter udara (sambungan)
10.
Masukkan kembali penutup filter pada tempatnya.
11.
Hidupkan proyektor dan reset waktu filter menggunakan item RESET FILTER HOURS dalam BASIC MENU. (1) Tekan tombol MENU untuk menampilkan menu. (2) Pilih RESET FILTERS HOURS menggunakan tombol kursor Λ / V, kemudian tekan kursor > (atau tombol SELECT). Sebuah dialog akan muncul. (3) Tekan tombol kursor > untuk memilih “OK” pada dialog. Ini akan mereset waktu filter.
PERINGATAN ► Sebelum merawat filter udara, pastikan kabel daya telah dilepas stekernya, dan biarkan agar proyektor cukup dingin. ►Hanya gunakan filter udara yang ditetapkan. Jangan gunakan proyektor tanpa filter udara atau penutup filter. Ini dapat menyebabkan kebakaran atau kerusakan pada proyektor. ►Bersihkan filter udara secara rutin. Jika filter udara tersumbat oleh debu atau sejenisnya, suhu internalnya dapat naik dan menyebabkan proyektor terbakar, hangus atau gagal berfungsi.
BAHASA INDONESIA
CATATAN • Reset waktu filter hanya bila Anda telah membersihkan atau mengganti filter udara, sehingga indikator filter udara tetap akurat. • Proyektor mungkin menampilkan pesan seperti “CHECK THE AIR FLOW” atau mematikan proyektor secara otomatis untuk mencegah agar proyektor tidak kepanasan.
15
Spesifikasi Item Nama produk Panel Kristal Cair Lampu
Spesifikasi Proyektor kristal cair IN5122: 786.432 piksel (1024 horizontal x 768 vertikal) IN5124: 1.024.000 piksel (1.280 horizontal x 800 vertikal) 245 W UHP
Speaker
16 W mono (8 W x2)
Catu daya/ Batas arus
AC100-120 V: 4,0 A, AC220-240 V: 2,0 A
Konsumsi daya AC100-120 V: 380 W, AC220-240 V: 360 W Kisaran suhu Ukuran Berat (massa)
Port
16
5 ~ 35 °C (Pengoperasian) 15,8” (L) x 4,4” (T) x 12,6” 401 (L) x 111 (T) x 318,5 (P) mm * Tidak termasuk komponen yang menonjol. Lihat gambar F-5 di belakang manual ini. sekitar 4,7 kg (10,4 lbs.) COMPUTER IN1 .......................... Jack mini D-sub 15 pin x1 COMPUTER IN2 (H, V, G/Y, B/Cb/Pb, R/Cr/Pr) ..... Jack BNC x5 HDMI ......................................................... Konektor HDMI x1 MONITOR OUT ............................. Jack mini D-sub 15 pin x1 COMPONENT (Y, Cb/Pb, Cr/Pr) ....................... Jack RCA x3 S-VIDEO ............................................. Jack DIN mini 4 pin x1 VIDEO ............................................................... Jack RCA x1 AUDIO IN1 ................................ 3,5 mm (stereo) jack mini x1 AUDIO IN2 ................................ 3,5 mm (stereo) jack mini x1 AUDIO IN3 (R, L) .............................................. Jack RCA x2 AUDIO OUT (R, L) ............................................ Jack RCA x2 USB TYPE A ................................... Konektor USB jenis A x1 USB TYPE B ................................... Konektor USB jenis B x1 CONTROL ........................................... Steker D-sub 9 pin x1 LAN .................................................................. Jack RJ45 x1 MIC ............................................ Jack mini 3,5 mm (mono) x1 REMOTE CONTROL ............... Jack mini 2,5 mm (stereo) x1
Pemecahan Masalah - Garansi dan layanan purna jual Jika terjadi pengoperasian abnormal (seperti asap, bau aneh atau suara berlebihan), segera hentikan penggunaan proyektor. Jika masalah terjadi pada proyektor, pertama-tama lihatlah “Pemecahan Masalah” pada Manual Pengguna, Panduan Cepat Memulai dan Panduan Jaringan dan jalankan pemeriksaan yang disarankan. Jika ini tidak juga mengatasi masalah, tanyakan pada dealer Anda atau perusahaan servis. Mereka akan memberi tahu Anda persyaratan garansi yang berlaku. Periksalah alamat web berikut di mana Anda dapat menemukan informasi terbaru untuk proyektor ini. Informasi Produk dan Manual:
http://www.infocus.com/support
Pengumuman merek dagang • Mac®, Macintosh® dan Mac OS® adalah merek dagang terdaftar dari Apple Inc. • Pentium® adalah merek dagang terdaftar dari Intel Corp. •A dobe® dan Acrobat®, Reader® adalah merek dagang terdaftar dari Adobe Systems Incorporated. • Microsoft®, Internet Explorer®, Windows®, Windows NT® dan Windows Vista® adalah merek dagang terdaftar dari Microsoft Corporation di A.S. dan/atau negara lainnya. • PowerPC® adalah merek dagang terdaftar dari International Business Machines Corporation. • HDMI®, logo HDMI dan High-Definition Multimedia Interface adalah merek dagang atau merek dagang terdaftar dari HDMI Licensing LLC di Amerika serikat dan negara lainnya. • Blu-ray Disc adalah merek dagang. Semua merek dagang lainnya adalah properti dari pemiliknya masing-masing.
Perjanjian Lisensi Pengguna Akhir untuk Perangkat Lunak Proyektor • Perangkat lunak pada proyektor ini terdiri dari berbagai modul perangkat lunak bebas dan terdapat hak cipta atau/dan hak cipta pihak ketiga untuk setiap modul perangkat lunak. • Pastikan untuk membaca “Perjanjian Lisensi Pengguna Akhir untuk Perangkat Lunak Proyektor" pada CD. 17
BAHASA INDONESIA
CATATAN • Informasi dalam manual ini dapat berubah tanpa pemberitahuan. • Pabrikan tidak bertanggung jawab terhadap segala kesalahan yang mungkin muncul dalam manual ini. • Penggandaan, transfer atau penyalinan semua atau sebagian dokumen ini tidak diizinkan tanpa persetujuan tertulis.
Perjanjian Lisensi Pengguna Akhir untuk Perangkat Lunak Proyektor Perangkat lunak di proyektor terdiri dari sejumlah modul perangkat lunak independen dan ada hak cipta kami atau/dan hak cipta pihak ketiga untuk tiap modul perangkat lunak tersebut. Proyektor juga menggunakan modul perangkat lunak yang kami kembangkan atau/dan produksi. Dan ada hak cipta kami atau kekayaan intelektual untuk tiap perangkat lunak tersebut serta item terkait, termasuk namun tidak terbatas pada dokumen menyangkut perangkat lunak tersebut. Hak-hak di atas ini dilindungi oleh hukum hak cipta dan hukum lainnya yang berlaku. Dan proyektor ini menggunakan berbagai modul perangkat lunak yang berlisensi Freeware berdasar GNU GENERAL PUBLIC LICENSE Versi 2 dan GNU LESSER GENERAL PUBLIC LICENSE Versi 2.1 yang ditetapkan oleh Free Software Foundation, Inc. (A.S.) atau perjanjian lisensi untuk tiap perangkat lunak. Lihatlah halaman Web berikut untuk perjanjian lisensi bagi modul perangkat lunak demikian dan perangkat lunak lainnya: http://www.infocus.com Hubungi dealer di wilayah Anda untuk mendapatkan informasi mengenai perangkat lunak berlisensi. Lihat untuk perjanjian lisensi setiap perangkat lunak di halaman berikut dan perjanjian lisensi tiap perangkat lunak di halaman Web guna mengetahui perincian persyaratan lisensi dan seterusnya. (Aslinya dalam bahasa Inggris adalah yang berlaku karena perjanjian lisensi dibuat oleh pihak ketiga selain kami.) Karena program (modul perangkat lunak) berlisensi bebas biaya, maka program ini disediakan "apa adanya" tanpa garansi apa pun, baik tersurat maupun tersirat, sejauh yang diizinkan oleh hukum yang berlaku. Dan kami tidak bertanggung jawab atau mengganti segala kerugian apa pun (termasuk namun tidak terbatas pada kehilangan data, kehilangan akurasi atau kehilangan kompatibilitas pada antarmuka dengan program lainnya) melalui perangkat lunak terkait atau/dan penggunaan perangkat lunak terkait sejauh yang diizinkan oleh hukum yang berlaku.
18
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991 Copyright © 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 1
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely 2
by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring theother work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or 3
modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be torefrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable underany particular circumstance, the balance of the section is intended toapply and the section as a whole is intended to apply in othercircumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software 4
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found.
Copyright © This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed 5
in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright © year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details. The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than `show w' and `show c'; they could even be mouse-clicks or menu items-- whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision' (which makes passes at compilers) written by James Hacker. <signature of Ty Coon>, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.
6
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999 Copyright © 1991, 1999 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author's
7
reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing nonfree programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in nonfree programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
8
GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility
9
still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any applicationsupplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If dentifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machinereadable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore
10
covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library" must include any data and utility
11
programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent
12
license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/ OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
13
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. Copyright © This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the library, if necessary. Here is a sample; alter the names:
14
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob' (a library for tweaking knobs) written by James Random Hacker. <signature of Ty Coon>, 1 April 1990 Ty Coon, President of Vice That's all there is to it!
GNU ABOUT THE OpenSSL TOOLKIT
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/). Copyright© 1998-2008 The OpenSSL Project. All rights reserved. THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young ([email protected]). Copyright (C) 1995-1998 Eric Young ([email protected]) All rights reserved. THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes software written by Tim Hudson ([email protected]). 15
Screen type
T-1 IN5122/IN5122c
(1024X768) (±10%) 16:9
4:3
Screen Projection Screen Projection Screen height Screen height size distance size distance Ⓗ Ⓥ ⓐ min. ⓐ max. ⓑ ⓒ Ⓗ Ⓥ ⓐ min. ⓐ max. ⓑ ⓒ
(inch) m
30 0.6 40 0.8 50 1.0 60 1.2 70 1.4 80 1.6 90 1.8 100 2.0 120 2.4 150 3.0 200 4.1 250 5.1 300 6.1
m
m inch
0.5 0.6 0.8 0.9 1.1 1.2 1.4 1.5 1.8 2.3 3.0 3.8 4.6
0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.6 4.5 6.1 7.6 9.1
m
34 46 58 70 82 94 106 118 142 179 239 300 360
inch cm inch cm inch m
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.5 10.1 12.6 15.1
57 46 18 77 61 24 97 76 30 117 91 36 137 107 42 157 122 48 177 137 54 197 152 60 237 183 72 297 229 90 396 305 120 496 381 150 596 457 180
0 0 0 0 0 0 0 0 0 0 0 0 0
m
0 0.7 0.4 0 0.9 0.5 0 1.1 0.6 0 1.3 0.7 0 1.5 0.9 0 1.8 1.0 0 2.0 1.1 0 2.2 1.2 0 2.7 1.5 0 3.3 1.9 0 4.4 2.5 0 5.5 3.1 0 6.6 3.7
m inch
0.9 1.3 1.6 1.9 2.3 2.6 2.9 3.3 3.9 5.0 6.6 8.3 10.0
m
inch cm inch cm inch
37 1.6 50 2.1 63 2.7 76 3.2 90 3.8 103 4.3 116 4.9 129 5.5 155 6.6 195 8.2 261 11.0 327 13.7 393 16.5
T-2 IN5124/IN5124c 16:10
63 44 84 58 106 73 128 87 150 102 171 116 193 131 215 145 258 174 323 218 432 291 541 363 650 436
17 -6 23 -8 29 -10 34 -12 40 -15 46 -17 51 -19 57 -21 69 -25 86 -31 114 -42 143 -52 172 -62
-2 -3 -4 -5 -6 -7 -7 -8 -10 -12 -16 -20 -25
Screen type
(1280X800) (±10%) 4:3
Screen Projection Screen Projection Screen height Screen height size distance size distance Ⓗ Ⓥ ⓐ min. ⓐ max. ⓑ ⓒ Ⓗ Ⓥ ⓐ min. ⓐ max. ⓑ ⓒ
(inch) m
30 0.6 40 0.9 50 1.1 60 1.3 70 1.5 80 1.7 90 1.9 100 2.2 120 2.6 150 3.2 200 4.3 250 5.4 300 6.5
16
m
m inch
0.4 0.9 0.5 1.2 0.7 1.6 0.8 1.9 0.9 2.2 1.1 2.5 1.2 2.9 1.3 3.2 1.6 3.8 2.0 4.8 2.7 6.4 3.4 8.1 4.0 9.7
36 49 61 74 87 100 113 126 151 190 254 318 382
m
1.5 2.1 2.6 3.2 3.7 4.2 4.8 5.3 6.4 8.0 10.7 13.4 16.1
inch cm inch cm inch m
61 82 103 124 145 167 188 209 251 315 421 526 632
44 17 59 23 74 29 89 35 104 41 118 47 133 52 148 58 178 70 222 87 296 117 370 146 444 175
-4 -2 -5 -2 -7 -3 -8 -3 -9 -4 -11 -4 -12 -5 -13 -5 -16 -6 -20 -8 -27 -11 -34 -13 -40 -16
m
0.6 0.5 0.8 0.6 1.0 0.8 1.2 0.9 1.4 1.1 1.6 1.2 1.8 1.4 2.0 1.5 2.4 1.8 3.0 2.3 4.1 3.0 5.1 3.8 6.1 4.6
m
inch
m
1.0 41 1.8 1.4 55 2.4 1.8 70 3.0 2.1 84 3.6 2.5 99 4.2 2.9 113 4.8 3.3 128 5.4 3.6 142 6.0 4.4 172 7.2 5.5 215 9.1 7.3 288 12.1 9.2 360 15.1 11.0 433 18.2
inch cm inch cm inch
69 50 93 67 117 84 141 101 165 117 189 134 213 151 237 168 285 201 357 251 476 335 596 419 716 503
20 -5 -2 26 -6 -2 33 -8 -3 40 -9 -4 46 -11 -4 53 -12 -5 59 -14 -5 66 -15 -6 79 -18 -7 99 -23 -9 132 -30 -12 165 -38 -15 198 -46 -18
F-1
Computer
F-2
Computer
Access point
USB storage device
17
F-3
VCR/DVD/Blu-ray Disc player
F-4 Speakers
Monitor
(with an amplifier)
Microphone system
Wired remote control
(optional)
18
F-5
[unit: mm] 19
DISPERINDAG No. 0287/1.824.51/09.03
